Settings

Changes here are saved as you make them; there is no save button.

Language

The language of the whole app: Nederlands, English, Deutsch, Français and Português. The default follows the device language, otherwise English.

Scanning Method

Only shown on a device that has a TrueDepth camera. Choose FaceID Camera to scan with the camera in the device, or Structure Sensor to scan with a Structure Sensor. You are asked this once, on first start.

FaceID

Appears when FaceID Camera is selected:

Setting	Options	Default	What it does
Mirror Clip	No / Yes	No	Set to Yes when you scan through the mirror clip. The saved scan is mirrored back so the foot has its real shape again.

Structure Sensor

Appears when Structure Sensor is selected:

Setting	Options	Default	What it does
Structure Version	Structure 3 / Structure Mark II	Structure 3	Which sensor you have. Choosing Structure Mark II switches to the depth handling for that sensor and restarts the sensor.
Gravity mode	No / Yes	No	Yes: the scan cube is levelled with gravity and finds its own distance, which suits a foot on the floor. No: the cube keeps a fixed distance in front of the camera and follows the camera.

Using one iPad for both scanners?

Gravity mode and Structure Version are read at the start of every scan, including scans with the FaceID camera. If FaceID scanning behaves oddly on an iPad that has also been used with a Structure Sensor, check these two settings.