Skip to main content

1. Base

The Base tab provides essential tools to start creating custom shoe lasts.

3D Scan​

Add 3D scan as reference or base, with options for toe box or featherline (sharp edge).

2D Scan​

Add 2D scans as design references.

Remove Cast​

Removes material around the foot by specified millimeters.

Visibility

Only visible when a 3D scan is added.

Heel Lift​

  • Mode:
    • Rotate: Rotates model to the correct heel lift (foot remains unmodified)
    • Correct: Adjusts model to desired heel lift height
  • Height: Required heel lift height in millimeters

Pattern​

Select or change shoe last template.

A pop-up will show with the following options:

  • Last Library: Use and modify library models
  • Union Last: Apply library model's toebox and featherline to 3D scan
  • Select 3D scan: Import existing shoe lasts from project
  • Import: Import external shoe last models

Production Method​

  • Milling: Last: Export as STL
  • 3D Print: Last: Print in hard material with customizable settings and optional dovetail split
  • 3D Print: Last Shell: Print upside down with tapered support for PU foam filling

Elements​

Add components to your design:

  • Elements: Remove material from model
  • Sinks: Add material for pressure relief area

Midsole Design​

See Midsole documentation for detailed options and settings.

Foil (Test Shoe)​

  • Enable/disable test shoe export options (required for printing)
  • Net Stabilization: Create plantar ribs for stable standing:
    • None: No stabilization
    • Short: Ribs to ball of foot
    • Long: Full-length ribs